15HR31

Piral HD Hydrotec Outsider panel
The 30,5 mm thickness of the foam and the 200 ?m of the external aluminium impart to this panel special resistance to atmospheric agents and accidental shocks and the internal coating in smooth aluminium makes this panel suitable for the construction of ducts to be fitted outdoors at the service of rooms where a high level of hygiene is required. It should be used in combination with the waterproofing sheath Gum Skin.

15HS31

Piral HD Hydrotec Outsider panel
The 30,5 mm thickness of the foam and the 200 ?m of the external aluminium impart to this panel special resistance to atmospheric agents and accidental shocks. It should be used in combination with the waterproofing sheath Gum Skin.

15HN21

Piral HD Hydrotec Outsider panel
The 30,5 mm thickness of the foam and the 200 ?m of the external aluminium impart to this panel special resistance to atmospheric agents and accidental shocks and the internal coating in smooth aluminium makes this panel suitable for the construction of ducts to be fitted outdoors at the service of rooms where a high level of hygiene is required. It should be used in combination with the waterproofing sheath Gum Skin.
flanges, profiles and accessories

21FN04

H Bayonet In Polymer for Invisible Flange
More Info
Built in shock-resistant polymer, this piece permits “invisible flanges” to be connected. Supplied in 2 meter rods.

21FN06

Invisible Flange Joint In Aluminium 30 mm
More Info
This special patented aluminium flange permits 30 mm th. ducts to be joined with extremely low leakage. The bars are supplied in 4 meter length.

21FN07

Tee Connector Flange Joint In Aluminium 30 mm
More Info
This patented flange permits the flanging of one duct into the side of another take-offs as tap-in or plenum chamber. The bars are supplied in 4 meter length.

21FN08

Covering Angle in Polymer
More Info
Covering Angle in Polymer

21FN09

Invisible Flange Joint In Polymer 30 mm
More Info
This special patented polymer flange permits 30 mm th. ducts to be joined with extremely low leakage. The bars are supplied in 4 meter length.

21FT06

Traditional Flange Joint In Aluminium 30 mm
More Info
Aluminium flange for the traditional joining of two ducts.

21FT07

Angle Bracket in PVC for 30 mm Thick Traditional Flange
More Info
Indicated to reinforce the duct corner and improve external appearance.

21GZ01

Outdoor reinforcement gauze (100 m roll)
More Info
Reinforcement gauze to be applied in correspondence of the joining flanges for outdoor installations, together with Gum Skin waterproofing treatment.

21PR07

“F” Section Bar In Aluminium 30 mm
More Info
It permits all accessories with fastening frames higher than 20 mm to be fastened to the ducts. Supplied in 4 meter rods.

21PR09

CORNER section bar in Aluminium 30 mm
More Info
CORNER section bar in Aluminium 30 mm

21PR14

“U” Section Bar in Aluminium 30 mm
More Info
Extremely versatile aluminium section for fastening of anti-vibration joints, volume dampers, and connection to sheet metal ducts. This section bar is supplied in 4 meter rods.

21PR15

“Chair” Section Bar in Aluminium 30 mm
More Info
Used to fasten ducts to air handling units and in the assembly of linear diffusers. This section bar is supplied in 4 meter rods.

21PR35

Deflector Profile in Aluminium 30 mm with antibacterial treatment
More Info
This section bar is used to apply deflectors to P3ductal ducts. It is supplied in 4 meters rods with antimicrobial treatment.

21SQ02

Zinc-Coated Steel Angle Bracket 30 mm
More Info
1.5 mm thick zinc-coated steel angle bracket.

21SQ04

Angle bracket for 30 mm “F” Section Bar
More Info

Angle bracket for 30 mm “F” Section Bar

glues, tapes and sealants

21CL00

Solvent For “PAINT” Glue

More Info

Solvent specific mixture for the possible dilution of paint glue to the proportion of 10/15% maximum. Suitable for accessories cleaning.

21CL01

“PAINT” Glue 4 Kg (Product subject to expiry)

More Info

Special glue formulated to obtain perfect adhesion on P3ductal panels foam. The product is supplied ready-to-use. Product subject to expiration.

21CL02

“PAINT” Glue 15 Kg (Product subject to expiry)

More Info

Special glue formulated to obtain perfect adhesion on P3ductal panels foam. The product is supplied ready-to-use. Product subject to expiration.

21CL06

Ultra-Rapid Glue 50 g (Product subject to expiry)

More Info

Medium-viscosity “super-glue” to glue aluminium section bars to the panels in just a few seconds. Product subject to expiration.

21CL07

Ultra-Rapid Glue 500 g (Product subject to expiry)

More Info

Medium-viscosity “super-glue” to glue aluminium section bars to the panels in just a few seconds. Product subject to expiration.

21CL08

“Profiles” Glue 500 g (Product subject to expiry)

More Info

Medium-viscosity adhesive for the gluing of aluminium and Polymer section bars. 500 gr pack. Product subject to expiration.

21SL02

Special Sealant, Sanitary Use, White Colour (Prod.sub.to exp.)

More Info

Single-component rapid-polymerisation silicone sealant with an efficient fungicide that prevents mildew formation. This product is indicated in the construction of ducts that convey particularly humid air. Product subject to expiration.

21CL10

P3ductal Hydroglue (Product subject to expiry)

More Info

New bi-component water-based adhesive developed specifically for the gluing of Piral HD Hydrotec panels. The advantages of using Hydroglue are total absence of solvents, elevated thermal resistance, non-flammability and easy and fast application (application with spray system and not with brush). 10 kg pack.

21CL11

Hydrocat, Hydroglue Catalyst (product subject to expiry)

More Info

Catalyst for using with Hydroglue. 10 kg pack. Product subject to expiration

21GS01

Gum Skin Waterproof Coating (Product Subject To Expiry)

More Info

This waterproofing sheath is resistant to UV rays and to freezing and thawing cycles. The inner-action additives, fungicides, bactericides and plasticising agents cause the product to remain completely unaltered over time, even in conditions of average industrial pollution. Standard colour: grey; other colours available upon request. Packaging: 15-litre drum.

21NS01

75mm Aluminium Tape (50m Roll)

More Info

Self-adhesive aluminium tape to use in the construction of the ducts. Supply: 50 meters roll and 4 rolls pack

21NS02

75mm P3ductal Aluminium Tape (50 m Roll)

More Info

Self-adhesive aluminium tape to use in the construction of the ducts. Supply: 50 meters roll and 16 rolls pack.

21NS05

75 mm P3ductal Embossed Aluminium Tape (50 m Roll)

More Info

Self-adhesive aluminium tape to use in the construction of ducts. Supply: 50 meters rolls and 4 rolls pack.

21NS09PLUS

Aluminium Tape with Self-Cleaning treatment.

More Info

Self-adhesive aluminium tape with self-cleaning treatment, used in the joining of careplus panels (internal side of the duct). Supply: 50 meters roll and 16 rolls pack.

21SL01

Sealant Aluminium Colour (Product subject to expiry)

More Info

Single-component silicone sealant with acetic reaction applied in a semi-dense paste that in just a few hours transforms into a rubbery substance resistant to atmospheric agents and high and low temperatures alike. 280 cc stick. Product subject to expiration.

21CL09

“Profiles” Outdoor Glue 500 g. For Section bars in outdoor installations (Prod. subj. to exp.)

More Info

Special polyurethane mono-component adhesive. It offers excellent tightness performance also in situation of high humidity and direct exposure to water. Bottles of 500 gr. Product subject to expiration.

other P3ductal accessories

21SS01

Self-Adhesive Hanger Bracket

More Info

This 1.5 mm zinc-coated bracket is used for rapid duct support and hanging. These brackets are equipped with a slot for the insertion of the threaded bar.

21SS05

Hooked Hanger Bracket

More Info

This 1.5 mm zinc-coated bracket is used for rapid duct support and hanging. These brackets are equipped with a slot for the insertion of the threaded bar.

21PR05

Saddle Section Bar In Aluminium 20 mm

More Info

Rectangular aluminium tube built in natural aluminium and supplied in 4 meter rods.

21RF01

Aluminium Shaped Disk

More Info

Aluminium disk to distribute the pressure created at the center over a wider surface to prevent damage to the panel, disk diameter 100 mm, hole diameter 10 mm.

21RF02

Reinforcement Section Bar In Aluminium

More Info

Special high stiffness aluminium alloy reinforcement section bar. Bars are supplied in 4 meters rods.

21FS03

Thermal Insulating Tape for Joints, Width: 100 mm, Length: 30 m, Thickness: 12 mm

More Info

Anti-condensation strip for joints in closed-cell cross-linked polyethylene foam coupled on one side with embossed aluminium, width: 100 mm, length: 30 m, 12 mm thick.

21GN04

Section Bar Supporting Anti-Vibration Sheet

More Info

This patented section bar permits to build anti-vibration joints in combination with anti-vibration sheet (21GN05) and the zinc-coated steel angle brackets (21SQ01). Built in UNI 6060 aluminium alloy.

21GN05

Anti-Vibration Sheet H= 100mm (25 m Roll)

More Info

PVC-coated polyester sheet with rubberized edges for the creation of anti-vibration joints with a perfect seal in combination with the sheet support section bar.

21CP03

Turning Vanes In Aluminium

More Info

Turning vane in aluminium with antimicrobial treatment. To insert in special flat guide.

21CP04

Flat Guide For Turning Vanes Fastening (Length 2 m)

More Info

Pre-drilled aluminium strip for the correct positioning of wing-section turning vanes. Supplied in 2 meter rods.

21CR10

Aluminium Tap-In Collars ø 100

More Info

Aluminium Tap-In Collars ø 100

21CR12

Aluminium Tap-In Collars ø 125

More Info

Aluminium Tap-In Collars ø 125

21CR15

Aluminium Tap-In Collars ø 150

More Info

Aluminium Tap-In Collars ø 150

21CR16

Aluminium Tap-In Collars ø 160

More Info

Aluminium Tap-In Collars ø 160

21CR20

Aluminium Tap-In Collars ø 200

More Info

Aluminium Tap-In Collars ø 200

21CR25

Aluminium Tap-In Collars ø 250

More Info

Aluminium Tap-In Collars ø 250

21CR30

Aluminium Tap-In Collars ø 300

More Info

Aluminium Tap-In Collars ø 300

21CR35

Aluminium Tap-In Collars ø 350

More Info

Aluminium Tap-In Collars ø 350

21FS01

Flexible Duct Fastening Strip

More Info

Flexible Duct Fastening Strip

21FS02

Connecting Fastener for 21FS01

More Info

Connecting Fastener for 21FS01

21GR01

Self-Adhesive Duct Gaskets

More Info

Light grey, self-adhesive polyurethane foam gasket. Indicated for the reduction of air leakage. Width: 15 mm; thickness: 10 mm.

21PR08

CORNER section bar in Aluminium 20 mm

More Info

CORNER section bar in Aluminium 20 mm

21RF03

Zinc-plated Self-Threading Screws 6,3 x 60 mm

More Info

Hexagon head self-threading screws with washer. Used to fasten reinforcement section bars, wing-profile turning vanes and splitters in elbows, etc.

21RV01

Special Aluminium Rivets 4,8 x 40 mm

More Info

The 30 mm length permits to create fastening to the panels through the section bars.

21SR04

Gear For Modular Damper

More Info

Gear For Modular Damper

21SR05

Gear Shims For Modular Damper

More Info

Gear Shims For Modular Damper

21SR06

Gasket For Modular Damper

More Info

Gasket For Modular Damper

21SR07

Drive For Modular Damper

More Info

This drive is used for manufacturing volume dampers.

21SR08

Screws For Modular Damper

More Info

Screws For Modular Damper

Contact Us

Send us a Message

1 + 12 =

Info

  • Mobile: +355 69 20 63 490
  • Office: +355 68 40 900 99

  • Address: Rr. Artan Lenja, Godina 14/1, Tirana, Albania