90° covering angles

PVC T profile – 30 mm th.

Aluminium covering frames

Covering frame

Scrwe for 21FN20

Solvent specific mixture for the possible dilution of paint glue to the proportion of 10/15% maximum. Suitable for accessories cleaning.

Special glue formulated to obtain perfect adhesion on P3ductal panels foam. The product is supplied ready-to-use. Product subject to expiration.

Special glue formulated to obtain perfect adhesion on P3ductal panels foam. The product is supplied ready-to-use. Product subject to expiration.

Medium-viscosity “super-glue” to glue aluminium section bars to the panels in just a few seconds. Product subject to expiration.

Medium-viscosity adhesive for the gluing of aluminium and Polymer section bars. 500 gr pack. Product subject to expiration.

Single-component rapid-polymerisation silicone sealant with an efficient fungicide that prevents mildew formation. This product is indicated in the construction of ducts that convey particularly humid air. Product subject to expiration.

New bi-component water-based adhesive developed specifically for the gluing of Piral HD Hydrotec panels. The advantages of using Hydroglue are total absence of solvents, elevated thermal resistance, non-flammability and easy and fast application (application with spray system and not with brush). 10 kg pack.

Catalyst for using with Hydroglue. 10 kg pack. Product subject to expiration

Self-adhesive aluminium tape to use in the construction of the ducts. Supply: 50 meters roll and 4 rolls pack

Self-adhesive aluminium tape to use in the construction of the ducts. Supply: 50 meters roll and 16 rolls pack.

Self-adhesive aluminium tape to use in the construction of ducts. Supply: 50 meters rolls and 4 rolls pack.

Self-adhesive aluminium tape with self-cleaning treatment, used in the joining of careplus panels (internal side of the duct). Supply: 50 meters roll and 16 rolls pack.

Special polyurethane mono-component adhesive. It offers excellent tightness performance also in situation of high humidity and direct exposure to water. Bottles of 500 gr. Product subject to expiration.

This 1.5 mm zinc-coated bracket is used for rapid duct support and hanging. These brackets are equipped with a slot for the insertion of the threaded bar.

This 1.5 mm zinc-coated bracket is used for rapid duct support and hanging. These brackets are equipped with a slot for the insertion of the threaded bar.

Rectangular aluminium tube built in natural aluminium and supplied in 4 meter rods.

Aluminium disk to distribute the pressure created at the center over a wider surface to prevent damage to the panel, disk diameter 100 mm, hole diameter 10 mm.

Anti-condensation strip for joints in closed-cell cross-linked polyethylene foam coupled on one side with embossed aluminium, width: 100 mm, length: 30 m, 12 mm thick.

This patented section bar permits to build anti-vibration joints in combination with anti-vibration sheet (21GN05) and the zinc-coated steel angle brackets (21SQ01). Built in UNI 6060 aluminium alloy.

PVC-coated polyester sheet with rubberized edges for the creation of anti-vibration joints with a perfect seal in combination with the sheet support section bar.

Turning vane in aluminium with antimicrobial treatment. To insert in special flat guide.

Aluminium Tap-In Collars ø 100

Aluminium Tap-In Collars ø 125

Aluminium Tap-In Collars ø 150

Aluminium Tap-In Collars ø 160

Aluminium Tap-In Collars ø 250

Aluminium Tap-In Collars ø 300

Aluminium Tap-In Collars ø 350

Flexible Duct Fastening Strip

Light grey, self-adhesive polyurethane foam gasket. Indicated for the reduction of air leakage. Width: 15 mm; thickness: 10 mm.

CORNER section bar in Aluminium 20 mm

Hexagon head self-threading screws with washer. Used to fasten reinforcement section bars, wing-profile turning vanes and splitters in elbows, etc.

The 30 mm length permits to create fastening to the panels through the section bars.

Gear Shims For Modular Damper

Gasket For Modular Damper

This drive is used for manufacturing volume dampers.

Screws For Modular Damper